Treats all water sources.
A granular sequestrant that
helps remove quickly water discoloration in swimming pools from the presence of
metals such as manganese, iron and copper.
Can also be used to
remove staining on every type of swimming pool surface due to metal.
Concentrate quality formula
Does not alter pH and is compatible
with any types of sanitizers
Do not make water cloudy
be used for the whole season with all types of filters:
Diatomaceous earth filter
1. Adjust pH between 6.8 - 7.2 and let the chlorine
level drop below 2 ppm.
2. For pool water discoloration, pour 150 g of METABAN
per 10,000 L of pool water directly over the swimming pool surface. For stain
removal, proceed to # 3.
3. Brush affected areas.
4. Add 150 g of MET
ABAN per 10,000 L of pool water to a pail of water and apply the concentrated
solution along the pool walls and/or in areas where staining is present. Where stains
are most prevalent directly brush with the product.
5. Severe staining of surfaces
may require up to 300 g of METABAN per 10,000 L of pool water.
6. Allow the
circulation system to run continuously for 24 hours.
7. After 24 hours, adjust pH
between 7.2 - 7.8 and alkalinity between 80 - 120 ppm.
8. Do not
superchlorinate water for at least 72 hours.
9. Continue to use METABAN on a
weekly basis to prevent the reoccurrence of staining of swimming pool surfaces or