OR CARTRIDGE FILTERS
FILTER CLEANER is a cleaner scientifically formulated to insure a
better filtration and to prolong filter life.
Removes accumulated dirt in
cartridge or sand filters.
FILTER CLEANER is effective in removing
scale, rust, oils and cosmetic residues.
1. Stop filter and remove cartridge.
2. In a plastic
pail prepare a solution of 1 L of FILTER CLEANER per 20 L of warm water. The
solution will be a peach colour.
3. Place cartridge upright in the solution,
making sure that there is enough solution to cover cartridge.
4. Allow to
soak for about 5 to 6 hours.
5. Remove cartridge and rinse immediately
with fresh water.
6. Replace cartridge and start filtration system.
and increases the effectiveness of the filter’s sand.
1. Make sure the
pool water is at maximum level above the skimmer.
2. Stop the filter and
make sure the skimmer basket is clean and empty.
3. Make sure the
filter is on the “Filter” position. Pour the contents of the bottle into the skimmer.
Start the filter and let it run for 5 seconds then stop. Let stand for 8 hours.
4. After 8 hours change the position of the filter to “Backwash”, start the filter
and let it run for 2 to 5 minutes. Stop the filter, put the filtration system back to the
“Filter” position and restart.